CƯA CẮT BÊ TÔNG CỨU HỘ CỨU NẠN

THÔNG SỐ KỸ THUẬT CƯA CẮT BÊ TÔNG CỨU HỖ - HÀN QUỐC

Model:  GHS-350C
1 Engine  Type: Air cooled, Two stroke, Single  Cylinder  Petrol  Engine
2 Displacement: Minimum 64 cc
3 Power  Minimum 2.5 KW
4. Speed: 8500rpm
5. Maximum output power: 3.6hp
6. Fuel tank  capacity:  1.5L
7. Blade  diameter: 12'or 14'
8. Cutting depth: Max 115mm
9. Weight:  12kg
10. Fuel: Mixed  fuel to  petrol and  2 stroke oil 4%
11. All position diaphragm type
12. Ignition: Electronically  controlled magneto ignition
13. Air filter: Free filter, Large  main  filter, sub-filter
14. Blades  (cutting wheel): 300 mm  diameter.
Diamond Tipped  Blade for cutting RCC(masonry  bricks, concrete, abrasive material, etc
Abrasive  wheel  for cutting metal.  Abrasive  wheel  for cutting RCC, masonry bricks, concrete, abrasive material, etc.)
15 Belt tension: Automatic
16 Additional Features
a. Wheel  Guard: Quickly adjustable to  suit  the  cutting position. b. Decompression valve: For easy  starting.
c. Control levers: Throttle trigger, trigger lock and  control levers  for start,  run  and  stop are  combined in the  handle for easy  operation and  control.
d. Recoil starter: The rope starter mechanism is shielded against dirt  and  dust  hence avoids  frequent maintenance.
17. Application: To cut  concrete with reinforced bars  (RCC), brick, stone, concrete block,  metal  sections (bar, angle,  channel, plate)  and  many  other building material.

* SPECIFICATION

1, Multi-stage filtration system, to  provide clean  air to  the  engine.
2, Large  capacity mailbox  design 1.5 liters, to  provide longer working  hours.
3, Fuel tank  cover
4, Safety  interlock switch,  easy  for safe  operation.
5, Door switch
6, Turn  on  / off switch
7, Pressure reducing valve, easy  to  start.
8, Quick  change blade button.
9, Semi  automatic belt  tension regulator, so that  the  machine running more smoothly.
10,  A  piece  of  transmission protective cover,  anti  dust.  The  cover  body  material is provided with  nylon  6 engineering plastics,  and  the  cover  body  is provided with a reinforcing rib, and  the  cover  body  is provided with a strong impact resistance.
11, The  bottom of the  machine is equipped with a rotating pulley,  to  facilitate  the  scene to  drag.
12, Close  to  the  foot  board design, start  the  machine in a stable state.
13, Start  the  pull rope,  manual reciprocating start.
14, The  new  and  improved  ignition  system, the  electrical  resistance  of the  high  voltage package value  has been greatly reduced and  start  has  been re adjust the  idle speed, start  easier.
15, Eead  handle.
16, Exhaust port
17, Axis, 1 "25.4mm for 14" mm  12 "for 20 axis blade

XUẤT XỨ: HÀN QUỐC